Fire door ironmongery in Stoke-on-Trent: what's involved
When you book fire door ironmongery in Stoke-on-Trent, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Stoke-on-Trent range from restaurants to purpose-built blocks of flats and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Stoke-on-Trent we replace them with hardware covered by each door's evidence. We supply ironmongery for Stoke-on-Trent fire doors that matches each door's test evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
As standard, the work covers:
- Intumescent pads and lock linings
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Lever handles, pull handles and push plates
The regulations behind fire doors in Stoke-on-Trent
Fire doors in Stoke-on-Trent fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Stoke-on-Trent above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door ironmongery in Stoke-on-Trent?
From blocks of flats to offices, the requirement for fire door ironmongery in Stoke-on-Trent comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
From enquiry to handover in Stoke-on-Trent
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Stoke-on-Trent?
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Stoke-on-Trent
Beyond Stoke-on-Trent itself we also cover nearby towns such as Newcastle-under-Lyme (3.2 km), Longton and Kidsgrove. The service, pricing and evidence are the same wherever you are.
Questions from Stoke-on-Trent
Do you cover ST4 and nearby postcodes?
Yes. We cover Stoke-on-Trent including ST4, and nearby towns such as Newcastle-under-Lyme and Longton. The survey and written quote are free.
Can you work from an existing inspection report for my Stoke-on-Trent building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.