Fire door ironmongery: our service in Sandown
From the PO36 postcode district outwards, we take on fire door ironmongery across Sandown for homes, blocks and workplaces.
In and around Sandown, fire door work covers everything from small offices to schools. We plan each job around the people who use the building.
We supply ironmongery for Sandown fire doors that matches each door's test evidence. Signage for fire doors in Sandown buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Intumescent pads and lock linings
- Fire door signage
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
Fire door law for Sandown properties
England's framework applies in Sandown. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Sandown, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Sandown need fire door ironmongery?
Landlords, managing agents, facilities teams and homeowners in Sandown can all commission fire door ironmongery from us. The usual settings are hotels and blocks of flats, though single doors for schools are just as welcome.
From enquiry to handover in Sandown
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Guide prices in Sandown
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one Sandown building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Sandown and neighbouring towns
We also cover towns near Sandown, including Ryde (8.7 km away), Newport (Isle of Wight) and Cowes. If your building is in PO36 or a neighbouring district, the service and pricing are the same.
Common questions
Is Sandown within your coverage area?
It is. We cover Sandown in Isle of Wight and neighbouring towns such as Ryde. There is no charge for the survey.
What happens on a survey in Sandown?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.