Fire door ironmongery: our service in Totton
When you book fire door ironmongery in Totton, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Buildings in and around Totton range from family homes after loft conversions to small blocks of flats and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Totton we replace them with hardware covered by each door's evidence. Signage for fire doors in Totton buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
On a typical job that means:
- Locks and latches covered by the evidence
- Bolts and selectors where specified
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
Which fire door rules apply in Totton?
In Totton, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Totton building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Buildings and duty holders in Totton
You are most likely to need fire door ironmongery if you look after blocks of flats, offices or HMOs. Whatever the building in Totton, we survey each opening and tell you which doors need work and which do not.
Our process in Totton
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Totton
If you need a budget figure first, the guide for fire door ironmongery is from £40 for minor items to £350 for a full hardware set per door, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Totton and neighbouring towns
Nearby towns we cover include Southampton, Hythe and Eastleigh. Distance from Totton does not change our guide prices, and the survey and quote are free.
Questions from Totton
Is Totton within your coverage area?
It is. We cover Totton in Hampshire and neighbouring towns such as Southampton. There is no charge for the survey.
What happens on a survey in Totton?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.