Fire door ironmongery in Aldershot: what's involved
If you need fire door ironmongery in Aldershot, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Aldershot range from light industrial buildings to small blocks of flats and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Signage for fire doors in Aldershot buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Aldershot we replace them with hardware covered by each door's evidence.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
As standard, the work covers:
- Locks and latches covered by the evidence
- Intumescent pads and lock linings
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
Which fire door rules apply in Aldershot?
In Aldershot, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Aldershot building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Who needs fire door ironmongery in Aldershot?
The need for fire door ironmongery usually arises in hotels or schools, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Aldershot to keep escape routes protected throughout.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Guide prices in Aldershot
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Aldershot building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Aldershot and neighbouring towns
We also cover towns near Aldershot, including Farnham (4.5 km away), Farnborough and Fleet. If your building is in GU11 or a neighbouring district, the service and pricing are the same.
Questions from Aldershot
Do you cover GU11 and nearby postcodes?
Yes. We cover Aldershot including GU11, and nearby towns such as Farnham and Farnborough. The survey and written quote are free.
What happens on a survey in Aldershot?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.