What fire door ironmongery in Tewkesbury should include
From the GL20 postcode district outwards, we take on fire door ironmongery across Tewkesbury for homes, blocks and workplaces.
Buildings in and around Tewkesbury range from houses with integral garages to small offices and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Tewkesbury we replace them with hardware covered by each door's evidence. Signage for fire doors in Tewkesbury buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
What you get:
- Fire-rated hinges, commonly grade 13
- Bolts and selectors where specified
- Intumescent pads and lock linings
- Lever handles, pull handles and push plates
Rules and responsibilities in Tewkesbury
Fire doors in Tewkesbury fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Tewkesbury above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Who needs fire door ironmongery in Tewkesbury?
You are most likely to need fire door ironmongery if you look after offices, blocks of flats or HMOs. Whatever the building in Tewkesbury, we survey each opening and tell you which doors need work and which do not.
Our process in Tewkesbury
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Tewkesbury?
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Tewkesbury as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Nearby areas we cover from Tewkesbury
Neighbouring towns such as Cheltenham, Gloucester, Great Malvern and Evesham are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Tewkesbury?
Yes, we take on fire door ironmongery in Tewkesbury and the surrounding area, including Cheltenham and Gloucester. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.