Fire door ironmongery in Maldon: what's involved
If you need fire door ironmongery in Maldon, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Maldon has a broad mix of buildings, including small blocks of flats, light industrial buildings and schools, and the same fire door principles apply to all of them.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Maldon we replace them with hardware covered by each door's evidence. Signage for fire doors in Maldon buildings is fitted as part of the job, not as an afterthought.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
On a typical job that means:
- Lever handles, pull handles and push plates
- Bolts and selectors where specified
- Fire door signage
- Fire-rated hinges, commonly grade 13
The regulations behind fire doors in Maldon
England's framework applies in Maldon. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Maldon, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Maldon
You are most likely to need fire door ironmongery if you look after blocks of flats, schools or HMOs. Whatever the building in Maldon, we survey each opening and tell you which doors need work and which do not.
From enquiry to handover in Maldon
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Maldon
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Maldon building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Maldon and nearby
Maldon is about 21.7 km from Southend-on-Sea, and we cover both, along with nearby Witham and Chelmsford. Send us your postcode and we'll confirm survey dates.
Common questions
Do you work in Maldon?
Yes, we take on fire door ironmongery in Maldon and the surrounding area, including Witham and Chelmsford. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Maldon?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.