What fire door ironmongery in Grays should include
When you book fire door ironmongery in Grays, the aim is simple: doors that close, latch and seal as tested, with records that prove it.
Fire doors in Grays protect escape routes in HMOs, low-rise blocks of flats and industrial estates alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Grays we replace them with hardware covered by each door's evidence. Signage for fire doors in Grays buildings is fitted as part of the job, not as an afterthought.
Why hardware choice matters
Fire doors are tested with particular hardware. Hinges hold the door in place as it heats up; locks and latches keep it shut against fire pressure; their holes are protected with intumescent linings. Swapping in a cheaper hinge, a larger lock body or a lever on a spindle that melts can change how the door behaves. Hinges for fire doors are commonly grade 13 to BS EN 1935.
As standard, the work covers:
- Fire-rated hinges, commonly grade 13
- Locks and latches covered by the evidence
- Fire door signage
- Bolts and selectors where specified
Rules and responsibilities in Grays
Fire doors in Grays fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Grays above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Buildings and duty holders in Grays
Typical settings for fire door ironmongery include offices, schools and hotels. In Grays, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Grays job runs
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Prices for fire door ironmongery in Grays
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Grays as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Around Grays
We also cover towns near Grays, including South Ockendon (4.6 km away), Gravesend and Dartford. If your building is in RM17 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover RM17 and nearby postcodes?
Yes. We cover Grays including RM17, and nearby towns such as South Ockendon and Gravesend. The survey and written quote are free.
What happens on a survey in Grays?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.