Fire door ironmongery in Workington, done to the evidence
If you need fire door ironmongery in Workington, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Workington range from care homes to houses with integral garages and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Workington we replace them with hardware covered by each door's evidence. We supply ironmongery for Workington fire doors that matches each door's test evidence.
Common hardware defects
Inspections regularly find missing hinge screws, mismatched hinges, plastic-bodied latches, unapproved bolts and locks fitted without intumescent protection. We replace them with items covered by the door's evidence and fit the matching pads and linings.
As standard, the work covers:
- Fire door signage
- Locks and latches covered by the evidence
- Bolts and selectors where specified
- Fire-rated hinges, commonly grade 13
Rules and responsibilities in Workington
The rules that apply to fire doors in Workington are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Workington block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door ironmongery in Workington?
From HMOs to schools, the requirement for fire door ironmongery in Workington comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Workington
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
What does fire door ironmongery cost in Workington?
Budget around from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. Our guide prices are the same in Workington as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Workington and neighbouring towns
We also cover towns near Workington, including Whitehaven (10.7 km away), Dumfries and Carlisle. If your building is in CA14 or a neighbouring district, the service and pricing are the same.
Common questions
Do you cover CA14 and nearby postcodes?
Yes. We cover Workington including CA14, and nearby towns such as Whitehaven and Dumfries. The survey and written quote are free.
What happens on a survey in Workington?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.