What fire door ironmongery in St Austell should include
Our fire door ironmongery service covers St Austell and the wider Cornwall area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Fire doors in St Austell protect escape routes in family homes after loft conversions, care homes and small blocks of flats alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in St Austell we replace them with hardware covered by each door's evidence. We supply ironmongery for St Austell fire doors that matches each door's test evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
What you get:
- Intumescent pads and lock linings
- Bolts and selectors where specified
- Fire door signage
- Fire-rated hinges, commonly grade 13
Fire door law for St Austell properties
England's framework applies in St Austell. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in St Austell, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in St Austell need fire door ironmongery?
From blocks of flats to hotels, the requirement for fire door ironmongery in St Austell comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a St Austell installation
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in St Austell
Guide pricing for fire door ironmongery: from £40 for minor items to £350 for a full hardware set per door, ex VAT. Volume work across several doors in one St Austell building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from St Austell
Nearby towns we cover include Truro, Newquay and Falmouth. Distance from St Austell does not change our guide prices, and the survey and quote are free.
Questions
Is St Austell within your coverage area?
It is. We cover St Austell in Cornwall and neighbouring towns such as Truro. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
How many hinges does a fire door need?
Usually at least three, of the type and grade specified in the door's evidence. Heavier or taller doors may need more.
Are brass hinges acceptable on fire doors?
Only if they are fire tested and covered by the door's evidence. Many decorative hinges are not.