What fire door ironmongery in Falmouth should include
If you need fire door ironmongery in Falmouth, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Buildings in and around Falmouth range from small offices to houses with integral garages and care homes. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Signage for fire doors in Falmouth buildings is fitted as part of the job, not as an afterthought. Missing hinge screws and unsuitable locks are routine findings on fire door inspections everywhere; in Falmouth we replace them with hardware covered by each door's evidence.
Signage
Most fire doors need a sign saying whether they should be kept shut, kept locked or are automatic. We fit signage appropriate to the door's use as part of the installation.
Each installation includes:
- Bolts and selectors where specified
- Locks and latches covered by the evidence
- Fire-rated hinges, commonly grade 13
- Intumescent pads and lock linings
Fire door law for Falmouth properties
England's framework applies in Falmouth. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Falmouth, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Falmouth need fire door ironmongery?
The need for fire door ironmongery usually arises in hotels or HMOs, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Falmouth to keep escape routes protected throughout.
What happens after you enquire
- Identify the door's certification and hardware schedule
- List items that need replacing
- Supply matching hardware
- Fit with correct pads and linings
- Check operation, closing and latching
- Record what was fitted
Budgeting for fire door ironmongery in Falmouth
As a guide, budget from £40 for minor items to £350 for a full hardware set per door, ex VAT for fire door ironmongery. The figure for your Falmouth building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Falmouth
Nearby towns we cover include Truro, Redruth and Camborne. Distance from Falmouth does not change our guide prices, and the survey and quote are free.
Questions
Do you cover TR11 and nearby postcodes?
Yes. We cover Falmouth including TR11, and nearby towns such as Truro and Redruth. The survey and written quote are free.
Can you work from an existing inspection report for my Falmouth building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do fire doors need signs?
Most fire doors in non-domestic buildings and common parts should carry signage showing whether they are to be kept shut, kept locked or are automatic.
Can I fit a new lock to a fire door?
Only one that is covered by the door's test evidence, fitted with the correct intumescent protection. A larger lock body or new holes can compromise the door.