Fire door frames in Royal Tunbridge Wells

Getting fire door frames right in Royal Tunbridge Wells

We provide fire door frames in Royal Tunbridge Wells (TN1 and the surrounding postcodes), from the first survey through to a documented handover.

Buildings in and around Royal Tunbridge Wells range from care homes to low-rise blocks of flats and high-street shops. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Frame-to-wall gaps on Royal Tunbridge Wells jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Royal Tunbridge Wells survey.

BS 8214:2026 and the frame-to-wall gap

The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.

Each installation includes:

• Frame-to-wall gap sealing with evidenced materials
• Photographs of fixing and sealing before covering
• Architraves and making good
• Assessment of frame condition and compatibility

What the rules say for Royal Tunbridge Wells

England's framework applies in Royal Tunbridge Wells. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Royal Tunbridge Wells, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Which buildings in Royal Tunbridge Wells need fire door frames?

The need for fire door frames usually arises in offices or schools, and sometimes converted houses. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Royal Tunbridge Wells to keep escape routes protected throughout.

The steps on a Royal Tunbridge Wells installation

1. Remove architraves and inspect frame fixing
2. Decide repair, re-fix or replace
3. Prepare the opening and fit the frame
4. Pack and fix at specified centres
5. Seal the frame-to-wall gap
6. Photograph, fit architraves and make good

Budgeting for fire door frames in Royal Tunbridge Wells

Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Royal Tunbridge Wells as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Around Royal Tunbridge Wells

Neighbouring towns such as Tonbridge, Crowborough, Sevenoaks and East Grinstead are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions