What fire door frames in Margate should include
Our fire door frames service in Margate is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Margate has a broad mix of buildings, including schools, houses with integral garages and HMOs, and the same fire door principles apply to all of them.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Margate survey. Frame-to-wall gaps on Margate jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
Each installation includes:
- Assessment of frame condition and compatibility
- Photographs of fixing and sealing before covering
- Fixing at specified centres with packing
- Hardwood or certified frames to suit the door
Rules and responsibilities in Margate
Fire doors in Margate fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Margate above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door frames fit in Margate
Typical settings for fire door frames include offices, schools and converted houses. In Margate, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Margate
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Margate
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Margate
We also cover towns near Margate, including Broadstairs (4.6 km away), Ramsgate and Deal. If your building is in CT9 or a neighbouring district, the service and pricing are the same.
Questions
Do you work in Margate?
Yes, we take on fire door frames in Margate and the surrounding area, including Broadstairs and Ramsgate. Send your postcode and a few details and we'll come back with survey dates.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.