Getting fire door frames right in Billericay
Looking for fire door frames in Billericay? We supply and fit certified fire doors and components across Billericay and the wider Essex area, working from a free survey and a fixed written quote.
Buildings in and around Billericay range from light industrial buildings to schools and small offices. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Billericay survey. We photograph every frame we fix in Billericay before the architraves go on, so the hidden work is on record.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Frame-to-wall gap sealing with evidenced materials
- Hardwood or certified frames to suit the door
- Fixing at specified centres with packing
- Assessment of frame condition and compatibility
Which fire door rules apply in Billericay?
England's framework applies in Billericay. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Billericay, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Buildings and duty holders in Billericay
Landlords, managing agents, facilities teams and homeowners in Billericay can all commission fire door frames from us. The usual settings are converted houses and schools, though single doors for older blocks of flats are just as welcome.
From enquiry to handover in Billericay
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Billericay
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Billericay building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Billericay and neighbouring towns
Neighbouring towns such as Basildon, Wickford, Brentwood and Pitsea are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you work in Billericay?
Yes, we take on fire door frames in Billericay and the surrounding area, including Basildon and Wickford. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Billericay?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.