What fire door frames in Eastbourne should include
We provide fire door frames in Eastbourne (BN21 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Eastbourne range from care homes to converted period houses and purpose-built flats. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Frame-to-wall gaps on Eastbourne jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Eastbourne survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
On a typical job that means:
- Assessment of frame condition and compatibility
- Architraves and making good
- Photographs of fixing and sealing before covering
- Frame-to-wall gap sealing with evidenced materials
The regulations behind fire doors in Eastbourne
Fire doors in Eastbourne fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Eastbourne above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Where fire door frames fit in Eastbourne
Landlords, managing agents, facilities teams and homeowners in Eastbourne can all commission fire door frames from us. The usual settings are older blocks of flats and schools, though single doors for offices are just as welcome.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Eastbourne
As a guide, budget £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. The figure for your Eastbourne building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Around Eastbourne
Neighbouring towns such as Hailsham, Seaford, Bexhill-on-Sea and Hastings are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Eastbourne within your coverage area?
It is. We cover Eastbourne in East Sussex and neighbouring towns such as Hailsham. There is no charge for the survey.
Can you work from an existing inspection report for my Eastbourne building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.
Can I use expanding foam around a fire door frame?
Only a fire-rated foam with evidence for that use and gap size. Ordinary expanding foam is not suitable.