Fire door frames in Buckley, done to the evidence
We provide fire door frames in Buckley (CH7 and the surrounding postcodes), from the first survey through to a documented handover.
Around Buckley, low-rise blocks of flats, industrial estates and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Frame-to-wall gaps on Buckley jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Buckley survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
As standard, the work covers:
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
- Architraves and making good
- Frame-to-wall gap sealing with evidenced materials
Fire door law for Buckley properties
Buckley is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.
One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.
Where fire door frames fit in Buckley
Typical settings for fire door frames include older blocks of flats, schools and offices. In Buckley, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Buckley installation
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Budgeting for fire door frames in Buckley
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Buckley building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Buckley
Buckley is about 14.7 km from Wrexham, and we cover both, along with nearby Hawarden and Deeside. Send us your postcode and we'll confirm survey dates.
Questions from Buckley
Do you cover CH7 and nearby postcodes?
Yes. We cover Buckley including CH7, and nearby towns such as Hawarden and Deeside. The survey and written quote are free.
How quickly can you survey in Buckley?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.