Getting fire door frames right in Slough
Looking for fire door frames in Slough? We supply and fit certified fire doors and components across Slough and the wider Berkshire area, working from a free survey and a fixed written quote.
In and around Slough, fire door work covers everything from GP surgeries to industrial units. We plan each job around the people who use the building.
Frame-to-wall gaps on Slough jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Slough survey.
BS 8214:2026 and the frame-to-wall gap
The 2026 revision of BS 8214 strengthened its guidance on sealing the gap between the frame and the surrounding structure, listing material types such as stone wool, mastic and fire-rated foam, and putting the emphasis on using what the evidence supports. We fill and seal that gap with materials covered by the doorset's or sealant's test evidence and photograph it before the architraves go back on.
Each installation includes:
- Photographs of fixing and sealing before covering
- Hardwood or certified frames to suit the door
- Architraves and making good
- Assessment of frame condition and compatibility
Which fire door rules apply in Slough?
In Slough, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.
Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Slough building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.
Where fire door frames fit in Slough
The need for fire door frames usually arises in converted houses or schools, and sometimes offices. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Slough to keep escape routes protected throughout.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
What does fire door frames cost in Slough?
Budget around £250–£600 per frame replaced, fixed and sealed, ex VAT for fire door frames. Our guide prices are the same in Slough as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Slough and nearby
Neighbouring towns such as Windsor, Maidenhead, Gerrards Cross and Uxbridge are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Slough?
Yes, we take on fire door frames in Slough and the surrounding area, including Windsor and Maidenhead. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Slough?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.

