Getting fire door frames right in Bracknell
Our fire door frames service in Bracknell is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Around Bracknell, houses with integral garages, industrial estates and HMOs all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
Frame-to-wall gaps on Bracknell jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out. In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Bracknell survey.
Why frames fail inspections
Many fire door problems start with the frame: softwood linings too thin for the door, frames cut back to fit a previous door, frames loose in the wall, or gaps behind the architrave stuffed with ordinary foam or left open. A perfect leaf hung in a frame like that cannot be relied on.
On a typical job that means:
- Architraves and making good
- Hardwood or certified frames to suit the door
- Fixing at specified centres with packing
- Photographs of fixing and sealing before covering
Which fire door rules apply in Bracknell?
England's framework applies in Bracknell. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Bracknell, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Which buildings in Bracknell need fire door frames?
You are most likely to need fire door frames if you look after offices, schools or older blocks of flats. Whatever the building in Bracknell, we survey each opening and tell you which doors need work and which do not.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Bracknell
If you need a budget figure first, the guide for fire door frames is £250–£600 per frame replaced, fixed and sealed, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Bracknell and neighbouring towns
We also cover towns near Bracknell, including Crowthorne (5.6 km away), Wokingham and Sandhurst. If your building is in RG12 or a neighbouring district, the service and pricing are the same.
Questions from Bracknell
Do you work in Bracknell?
Yes, we take on fire door frames in Bracknell and the surrounding area, including Crowthorne and Wokingham. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Bracknell?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.
Why do you photograph the frame before fitting architraves?
Because the fixing and sealing are hidden once the architraves go on. Photographs give you evidence that the hidden work was done correctly.