Fire door frames for Ampthill buildings
From the MK45 postcode district outwards, we take on fire door frames across Ampthill for homes, blocks and workplaces.
Ampthill has a broad mix of buildings, including family homes after loft conversions, schools and houses with integral garages, and the same fire door principles apply to all of them.
In older buildings the frame can be the weak point even where the leaf is sound, so we check it on every Ampthill survey. Frame-to-wall gaps on Ampthill jobs are sealed with materials supported by the test evidence, as BS 8214:2026 sets out.
Frames on their own
Where a leaf is sound but the frame is not, a new compatible frame can sometimes be fitted to the existing leaf, provided the combination is supported by the leaf's certification. More often, a frame replacement is part of a doorset installation.
What you get:
- Hardwood or certified frames to suit the door
- Photographs of fixing and sealing before covering
- Frame-to-wall gap sealing with evidenced materials
- Architraves and making good
Fire door law for Ampthill properties
The rules that apply to fire doors in Ampthill are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Ampthill block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Where fire door frames fit in Ampthill
The need for fire door frames usually arises in older blocks of flats or offices, and sometimes converted houses. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Ampthill to keep escape routes protected throughout.
What happens after you enquire
- Remove architraves and inspect frame fixing
- Decide repair, re-fix or replace
- Prepare the opening and fit the frame
- Pack and fix at specified centres
- Seal the frame-to-wall gap
- Photograph, fit architraves and make good
Prices for fire door frames in Ampthill
Guide pricing for fire door frames: £250–£600 per frame replaced, fixed and sealed, ex VAT. Volume work across several doors in one Ampthill building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Ampthill and neighbouring towns
Neighbouring towns such as Bedford, Dunstable, Leighton Buzzard and Bletchley are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Do you cover MK45 and nearby postcodes?
Yes. We cover Ampthill including MK45, and nearby towns such as Bedford and Dunstable. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Can a new frame be fitted to my existing door?
Sometimes, if the frame is compatible with the door's certification. Often it is simpler and better evidenced to replace the whole doorset.
What is the frame-to-wall gap?
It is the space between the door frame and the surrounding wall, normally hidden by the architrave. If it is not filled with a suitable fire-resisting material, fire and smoke can pass around the door.