Fire door closers: our service in Brighouse
From the HD6 postcode district outwards, we take on fire door closers across Brighouse for homes, blocks and workplaces.
Buildings in and around Brighouse range from schools to family homes after loft conversions and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
A closer that fails to latch the door is one of the first things we put right on Brighouse fire doors. Free-swing closers are a practical option for Brighouse care homes and supported living.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
As standard, the work covers:
- Adjustment of speed, latching and backcheck
- Overhead, concealed or free-swing options
- Record of model and settings
- Close-and-latch test from full open
Fire door law for Brighouse properties
The rules that apply to fire doors in Brighouse are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Brighouse block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door closers in Brighouse?
Typical settings for fire door closers include care homes, HMOs and offices. In Brighouse, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Brighouse
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Prices for fire door closers in Brighouse
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Brighouse building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Brighouse
Neighbouring towns such as Halifax, Cleckheaton, Huddersfield and Batley are covered too, so clients with several buildings can use one installer and one evidence format.
Common questions
Is Brighouse within your coverage area?
It is. We cover Brighouse in West Yorkshire and neighbouring towns such as Halifax. There is no charge for the survey.
What happens on a survey in Brighouse?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
What is a free-swing closer?
A closer that lets the door swing freely in normal use and closes it when the fire alarm operates. It suits care settings and people who find doors heavy.