Fire door closers for Kenilworth buildings
Our fire door closers service covers Kenilworth and the wider Warwickshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Around Kenilworth, family homes after loft conversions, small blocks of flats and schools all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
A closer that fails to latch the door is one of the first things we put right on Kenilworth fire doors. We set closers in Kenilworth buildings so doors close fully without becoming too heavy to open.
Setting a closer properly
Closers have adjustments for closing speed, latching action and often backcheck. We set them so the door closes from any angle and engages the latch, without slamming. In England, Approved Document M guidance on opening force, no more than 30N for the first 30 degrees and 22.5N from 30 to 60 degrees at the leading edge, is a useful benchmark for usability. Our closers guide has more detail.
What you get:
- Close-and-latch test from full open
- Correctly powered closer to BS EN 1154
- Assessment of door size, weight and use
- Overhead, concealed or free-swing options
Which fire door rules apply in Kenilworth?
The rules that apply to fire doors in Kenilworth are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Kenilworth block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Kenilworth
Typical settings for fire door closers include schools, care homes and offices. In Kenilworth, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Kenilworth job runs
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
What does fire door closers cost in Kenilworth?
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Kenilworth building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Kenilworth
Nearby towns we cover include Warwick, Coventry and Royal Leamington Spa. Distance from Kenilworth does not change our guide prices, and the survey and quote are free.
Questions from Kenilworth
Do you work in Kenilworth?
Yes, we take on fire door closers in Kenilworth and the surrounding area, including Warwick and Coventry. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Kenilworth?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
Why won't my fire door latch?
Usually the closer is out of adjustment or under-powered, or the latch and keep are misaligned. Both are normally quick to fix.