Fire door closers in Corby, done to the evidence
Looking for fire door closers in Corby? We supply and fit certified fire doors and components across Corby and the wider Northamptonshire area, working from a free survey and a fixed written quote.
Fire doors in Corby protect escape routes in family homes after loft conversions, high-street shops and industrial estates alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Free-swing closers are a practical option for Corby care homes and supported living. A closer that fails to latch the door is one of the first things we put right on Corby fire doors.
The most common fire door fault
A fire door that does not close is not doing its job. Closers fail because they are under-powered, out of adjustment, damaged, leaking or disconnected by people who find the door too heavy. Often the fix is a correctly sized closer, set up properly, rather than a new door.
On a typical job that means:
- Close-and-latch test from full open
- Record of model and settings
- Overhead, concealed or free-swing options
- Adjustment of speed, latching and backcheck
The regulations behind fire doors in Corby
The rules that apply to fire doors in Corby are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Corby block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Who needs fire door closers in Corby?
Typical settings for fire door closers include blocks of flats, HMOs and offices. In Corby, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Corby installation
- Check the door, frame and existing closer
- Select a closer suited to the leaf and use
- Fit to the template and the door's evidence
- Adjust closing and latching speeds
- Test from wide and small opening angles
- Record the closer and its settings
Guide prices in Corby
Guide pricing for fire door closers: £90–£220 per closer supplied and fitted; adjustment visits from £195, ex VAT. Volume work across several doors in one Corby building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Corby
We also cover towns near Corby, including Kettering (11.2 km away), Market Harborough and Wellingborough. If your building is in NN17 or a neighbouring district, the service and pricing are the same.
Common questions
Do you work in Corby?
Yes, we take on fire door closers in Corby and the surrounding area, including Kettering and Market Harborough. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Corby?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can a fire door closer be too strong?
Yes. An over-powered or badly set closer makes the door hard to open and may lead people to wedge it. The goal is reliable closing with a reasonable opening force.
What is a free-swing closer?
A closer that lets the door swing freely in normal use and closes it when the fire alarm operates. It suits care settings and people who find doors heavy.