FD60 fire doors in Trowbridge, done to the evidence
We provide FD60 fire doors in Trowbridge (BA14 and the surrounding postcodes), from the first survey through to a documented handover.
Fire doors in Trowbridge protect escape routes in small blocks of flats, family homes after loft conversions and care homes alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Trowbridge buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Trowbridge we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
What you get:
- Certified FD60 doorset or leaf with matching evidence
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
- 60-minute glazing systems where vision panels are needed
What the rules say for Trowbridge
England's framework applies in Trowbridge. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.
For blocks over 11 metres in Trowbridge, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.
Who needs FD60 fire doors in Trowbridge?
The need for FD60 fire doors usually arises in plant and boiler rooms or mixed-use commercial buildings, and sometimes stair cores in taller blocks. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Trowbridge to keep escape routes protected throughout.
From enquiry to handover in Trowbridge
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Trowbridge?
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Trowbridge building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Nearby areas we cover from Trowbridge
Neighbouring towns such as Bath, Frome, Chippenham and Kingswood are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you cover BA14 and nearby postcodes?
Yes. We cover Trowbridge including BA14, and nearby towns such as Bath and Frome. The survey and written quote are free.
Can you work from an existing inspection report for my Trowbridge building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.

