FD60 fire doors in Gorseinon, done to the evidence
For property owners, landlords and managing agents in Gorseinon, we offer FD60 fire doors with one team for the survey, the product and the installation.
Buildings in and around Gorseinon range from schools to small blocks of flats and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
For FD60 work in Gorseinon we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Gorseinon buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
As standard, the work covers:
- 60-minute glazing systems where vision panels are needed
- Intumescent and smoke seals as specified
- Check of the fire strategy rating for each opening
- Certified FD60 doorset or leaf with matching evidence
Which fire door rules apply in Gorseinon?
Gorseinon is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.
One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.
Buildings and duty holders in Gorseinon
Typical settings for FD60 fire doors include refuse stores, stair cores in taller blocks and plant and boiler rooms. In Gorseinon, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
How a Gorseinon job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Gorseinon
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Covering Gorseinon and nearby
Gorseinon is about 8.7 km from Swansea, and we cover both, along with nearby Llanelli and Ammanford. Send us your postcode and we'll confirm survey dates.
Questions from Gorseinon
Do you cover SA4 and nearby postcodes?
Yes. We cover Gorseinon including SA4, and nearby towns such as Llanelli and Swansea. The survey and written quote are free.
What happens on a survey in Gorseinon?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.

