FD60 fire doors in Clevedon

Getting FD60 fire doors right in Clevedon

If you need FD60 fire doors in Clevedon, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Buildings in and around Clevedon range from schools to small blocks of flats and houses with integral garages. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Before ordering FD60 doors for a Clevedon building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Clevedon we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

Each installation includes:

• Check of the fire strategy rating for each opening
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• Frame fixing and structural gap sealing recorded with photos

Which fire door rules apply in Clevedon?

Fire doors in Clevedon fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Clevedon above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Clevedon

Typical settings for FD60 fire doors include refuse stores, plant and boiler rooms and stair cores in taller blocks. In Clevedon, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Clevedon

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Clevedon

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Clevedon as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Clevedon

Neighbouring towns such as Nailsea, Portishead, Weston-super-Mare and Bristol are covered too, so clients with several buildings can use one installer and one evidence format.

Questions from Clevedon