FD60 fire doors in Bristol

FD60 fire doors: our service in Bristol

Looking for FD60 fire doors in Bristol? We supply and fit certified fire doors and components across Bristol and the surrounding area, working from a free survey and a fixed written quote.

Bristol has a broad mix of buildings, including converted flats, student accommodation and clinics, and the same fire door principles apply to all of them.

FD60 openings in Bristol buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Bristol building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

What you get:

• Frame fixing and structural gap sealing recorded with photos
• Load-rated hinges and correctly powered closer
• Intumescent and smoke seals as specified
• Certified FD60 doorset or leaf with matching evidence

Which fire door rules apply in Bristol?

Fire doors in Bristol fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Bristol above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Buildings and duty holders in Bristol

From refuse stores to mixed-use commercial buildings, the requirement for FD60 fire doors in Bristol comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

From enquiry to handover in Bristol

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Bristol?

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Bristol as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Covering Bristol and nearby

As well as Bristol, we cover neighbouring towns including Kingswood, Mangotsfield and Nailsea. The survey and quote are free.

Questions from Bristol