FD60 fire doors in Shrewsbury

Getting FD60 fire doors right in Shrewsbury

From the SY1 postcode district outwards, we take on FD60 fire doors across Shrewsbury for homes, blocks and workplaces.

Shrewsbury has a broad mix of buildings, including care homes, schools and family homes after loft conversions, and the same fire door principles apply to all of them.

For FD60 work in Shrewsbury we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Shrewsbury buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

What you get:

• Frame fixing and structural gap sealing recorded with photos
• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• 60-minute glazing systems where vision panels are needed

The regulations behind fire doors in Shrewsbury

England's framework applies in Shrewsbury. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Shrewsbury, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Buildings and duty holders in Shrewsbury

From stair cores in taller blocks to plant and boiler rooms, the requirement for FD60 fire doors in Shrewsbury comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

What happens after you enquire

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Shrewsbury

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Shrewsbury

We also cover towns near Shrewsbury, including Wellington (15.9 km away), Telford and Rhosllannerchrugog. If your building is in SY1 or a neighbouring district, the service and pricing are the same.

Questions