FD60 fire doors in Wellingborough

FD60 fire doors in Wellingborough, done to the evidence

Our FD60 fire doors service covers Wellingborough and the wider Northamptonshire area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Fire doors in Wellingborough protect escape routes in high-street shops, HMOs and houses with integral garages alike. We adapt the programme to the building and its occupants, never the standard of the installation.

For FD60 work in Wellingborough we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Wellingborough buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

As standard, the work covers:

• Frame fixing and structural gap sealing recorded with photos
• 60-minute glazing systems where vision panels are needed
• Check of the fire strategy rating for each opening
• Intumescent and smoke seals as specified

Rules and responsibilities in Wellingborough

In Wellingborough, as elsewhere in England, the starting point is the Fire Safety Order 2005: whoever controls a workplace or the shared parts of a residential block must make sure its fire doors work. When doors are replaced, the Building Regulations and Approved Document B set the standard the new work has to meet.

Blocks above 11 metres have a specific routine under regulation 10 of the Fire Safety (England) Regulations 2022: quarterly checks of communal fire doors and annual best-endeavours checks of flat front doors. If your Wellingborough building is a higher-risk building under the Building Safety Act 2022, we confirm the approval route with the Principal Accountable Person before any work is ordered.

Where FD60 fire doors fit in Wellingborough

From plant and boiler rooms to mixed-use commercial buildings, the requirement for FD60 fire doors in Wellingborough comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

Our process in Wellingborough

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Wellingborough?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Wellingborough

Wellingborough is about 14.1 km from Northampton, and we cover both, along with nearby Rushden and Kettering. Send us your postcode and we'll confirm survey dates.

Questions from Wellingborough