FD60 fire door installation in Birkenhead

FD60 fire doors in Birkenhead: what's involved

Our FD60 fire doors service covers Birkenhead and the wider Merseyside area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Birkenhead has a broad mix of buildings, including purpose-built blocks of flats, shared houses and converted flats, and the same fire door principles apply to all of them.

FD60 openings in Birkenhead buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Birkenhead we generally fit certified doorsets, so frame and leaf share the same test evidence.

What do you hand over at the end?

For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.

What you get:

• Check of the fire strategy rating for each opening
• Frame fixing and structural gap sealing recorded with photos
• 60-minute glazing systems where vision panels are needed
• Intumescent and smoke seals as specified

Rules and responsibilities in Birkenhead

England's framework applies in Birkenhead. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Birkenhead, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD60 fire doors fit in Birkenhead

From plant and boiler rooms to mixed-use commercial buildings, the requirement for FD60 fire doors in Birkenhead comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.

The steps on a Birkenhead installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Birkenhead?

If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Nearby areas we cover from Birkenhead

Neighbouring towns such as Liverpool, Wallasey, Bebington and Bootle are covered too, so clients with several buildings can use one installer and one evidence format.

Questions