Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD60 fire doors in Chorley

Heavier 60-minute doors for stair cores, plant rooms and higher-risk compartment lines. Covering Chorley and PR6, with a free survey and fixed written quote.

Quote in Chorley

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

FD60 fire doors in Chorley, done to the evidence

If you need FD60 fire doors in Chorley, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Chorley has a broad mix of buildings, including schools, light industrial buildings and small blocks of flats, and the same fire door principles apply to all of them.

FD60 openings in Chorley buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Chorley we generally fit certified doorsets, so frame and leaf share the same test evidence.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

On a typical job that means:

  • Certified FD60 doorset or leaf with matching evidence
  • Load-rated hinges and correctly powered closer
  • Intumescent and smoke seals as specified
  • 60-minute glazing systems where vision panels are needed

The regulations behind fire doors in Chorley

The rules that apply to fire doors in Chorley are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.

Where a Chorley block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.

Who needs FD60 fire doors in Chorley?

The need for FD60 fire doors usually arises in plant and boiler rooms or stair cores in taller blocks, and sometimes mixed-use commercial buildings. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Chorley to keep escape routes protected throughout.

Our process in Chorley

  1. Confirm the 60-minute requirement against the fire strategy
  2. Survey structure, opening size and wall type
  3. Order the certified doorset with ironmongery to its evidence
  4. Install the frame, fix and seal it to the structure
  5. Hang, adjust and test the leaf, closer and latching
  6. Record evidence and make good

What does FD60 fire doors cost in Chorley?

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Chorley as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Nearby areas we cover from Chorley

We also cover towns near Chorley, including Leyland (7.1 km away), Darwen and Wigan. If your building is in PR6 or a neighbouring district, the service and pricing are the same.

Questions from Chorley

Do you cover PR6 and nearby postcodes?

Yes. We cover Chorley including PR6, and nearby towns such as Leyland and Darwen. The survey and written quote are free.

Can you work from an existing inspection report for my Chorley building?

Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.

Can I upgrade an FD30 door to FD60?

Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.

Are FD60 doors harder to open?

They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.

Talk to us about Chorley

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote