FD60 fire doors in Wigan

FD60 fire doors in Wigan: what's involved

Our FD60 fire doors service in Wigan is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Wigan range from industrial units to offices and GP surgeries. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Before ordering FD60 doors for a Wigan building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Wigan we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

What you get:

• Check of the fire strategy rating for each opening
• Intumescent and smoke seals as specified
• Load-rated hinges and correctly powered closer
• Certified FD60 doorset or leaf with matching evidence

Which fire door rules apply in Wigan?

England's framework applies in Wigan. Approved Document B guides the fire performance of new and replacement doors under the Building Regulations 2010. Day-to-day duties sit with the responsible person under the Fire Safety Order 2005, and for multi-occupied residential buildings, the Fire Safety (England) Regulations 2022 add duties such as giving residents information about fire doors.

For blocks over 11 metres in Wigan, those regulations require communal fire door checks at least every three months and best-endeavours flat entrance door checks each year. In higher-risk buildings, building work is overseen by the Building Safety Regulator, so we check whether approval is needed before starting.

Where FD60 fire doors fit in Wigan

Typical settings for FD60 fire doors include plant and boiler rooms, stair cores in taller blocks and mixed-use commercial buildings. In Wigan, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

Our process in Wigan

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Wigan

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Wigan building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Covering Wigan and nearby

Neighbouring towns such as Hindley, Ashton-in-Makerfield, Westhoughton and Golborne are covered too, so clients with several buildings can use one installer and one evidence format.

Questions