FD60 fire doors across Gwynedd

FD60 fire doors for Gwynedd buildings

We provide FD60 fire doors across Gwynedd, covering 44 postcode districts from LL23 to LL78.

Before ordering FD60 doors for a Gwynedd building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Gwynedd we generally fit certified doorsets, so frame and leaf share the same test evidence.

Fire door work in Gwynedd spans housing providers with large estates, individual landlords, businesses and homeowners. We price every job from a survey, never from a list price alone, because the condition of the frames and the hardware makes a real difference.

Why FD60 installation is less forgiving

A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.

Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.

The regulations behind fire doors in Gwynedd

Gwynedd is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.

One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.

From enquiry to handover in Gwynedd

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

What does FD60 fire doors cost in Gwynedd?

Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Gwynedd as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.

Common questions