What FD60 fire doors in Newport (Gwent) should include
From the NP20 postcode district outwards, we take on FD60 fire doors across Newport (Gwent) for homes, blocks and workplaces.
Newport (Gwent) has a broad mix of buildings, including offices, converted period houses and care homes, and the same fire door principles apply to all of them.
FD60 openings in Newport (Gwent) buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Newport (Gwent) we generally fit certified doorsets, so frame and leaf share the same test evidence.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
What you get:
- 60-minute glazing systems where vision panels are needed
- Certified FD60 doorset or leaf with matching evidence
- Load-rated hinges and correctly powered closer
- Intumescent and smoke seals as specified
The regulations behind fire doors in Newport (Gwent)
Newport (Gwent) is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.
One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.
Buildings and duty holders in Newport (Gwent)
The need for FD60 fire doors usually arises in plant and boiler rooms or stair cores in taller blocks, and sometimes mixed-use commercial buildings. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Newport (Gwent) to keep escape routes protected throughout.
How a Newport (Gwent) job runs
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Newport (Gwent)
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Newport (Gwent) building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Newport (Gwent) and neighbouring towns
Beyond Newport (Gwent) itself we also cover nearby towns such as Risca (7.4 km), Cwmbran and Pontypool. The service, pricing and evidence are the same wherever you are.
Common questions
Is Newport (Gwent) within your coverage area?
It is. We cover Newport (Gwent) in Gwent and neighbouring towns such as Risca. There is no charge for the survey.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.