What FD60 fire doors in Cwmbran should include
If you need FD60 fire doors in Cwmbran, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
In and around Cwmbran, fire door work covers everything from light industrial buildings to schools. We plan each job around the people who use the building.
FD60 openings in Cwmbran buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Cwmbran we generally fit certified doorsets, so frame and leaf share the same test evidence.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
On a typical job that means:
- Load-rated hinges and correctly powered closer
- Check of the fire strategy rating for each opening
- 60-minute glazing systems where vision panels are needed
- Certified FD60 doorset or leaf with matching evidence
Which fire door rules apply in Cwmbran?
Cwmbran is in Wales, where new and replacement fire doors are covered by the Building Regulations 2010 as applied in Wales, with the Welsh Approved Document B as guidance. The Regulatory Reform (Fire Safety) Order 2005 also applies, so responsible persons in workplaces and the common parts of blocks must keep fire doors maintained.
One difference from England: regulation 10 of the Fire Safety (England) Regulations 2022, with its quarterly and annual fire door checks, does not apply in Wales. Your fire risk assessment sets the checking regime instead, and we work to it.
Where FD60 fire doors fit in Cwmbran
From refuse stores to mixed-use commercial buildings, the requirement for FD60 fire doors in Cwmbran comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Cwmbran
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Cwmbran
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Cwmbran building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Cwmbran and neighbouring towns
We also cover towns near Cwmbran, including Pontypool (5.4 km away), Risca and Newport (Gwent). If your building is in NP44 or a neighbouring district, the service and pricing are the same.
Questions from Cwmbran
Do you work in Cwmbran?
Yes, we take on FD60 fire doors in Cwmbran and the surrounding area, including Pontypool and Risca. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Cwmbran?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.