What FD60 fire doors in Dundee should include
If you need FD60 fire doors in Dundee, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.
Fire doors in Dundee protect escape routes in purpose-built flats, industrial units and offices alike. We adapt the programme to the building and its occupants, never the standard of the installation.
FD60 openings in Dundee buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Dundee building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
On a typical job that means:
- Intumescent and smoke seals as specified
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
- Check of the fire strategy rating for each opening
Rules and responsibilities in Dundee
Scottish rules apply to fire doors in Dundee. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Dundee are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
Buildings and duty holders in Dundee
From plant and boiler rooms to stair cores in taller blocks, the requirement for FD60 fire doors in Dundee comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
The steps on a Dundee installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
What does FD60 fire doors cost in Dundee?
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Dundee
As well as Dundee, we cover neighbouring towns including Arbroath, Perth and Glenrothes. The survey and quote are free.
Questions
Do you cover DD1 and nearby postcodes?
Yes. We cover Dundee including DD1, and nearby towns such as Arbroath and Perth. The survey and written quote are free.
Do I need to be there for the survey?
Someone needs to give us access to the doors. For blocks and commercial buildings, a caretaker or site contact is fine; for HMOs and homes, we agree a time with you or your tenants.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.