What FD60 fire doors in Swadlincote should include
We provide FD60 fire doors in Swadlincote (DE11 and the surrounding postcodes), from the first survey through to a documented handover.
In and around Swadlincote, fire door work covers everything from family homes after loft conversions to schools. We plan each job around the people who use the building.
For FD60 work in Swadlincote we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Swadlincote buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
What you get:
- Load-rated hinges and correctly powered closer
- Frame fixing and structural gap sealing recorded with photos
- Certified FD60 doorset or leaf with matching evidence
- Intumescent and smoke seals as specified
Rules and responsibilities in Swadlincote
Fire doors in Swadlincote fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.
For residential buildings in Swadlincote above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.
Which buildings in Swadlincote need FD60 fire doors?
Typical settings for FD60 fire doors include stair cores in taller blocks, mixed-use commercial buildings and refuse stores. In Swadlincote, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
Our process in Swadlincote
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Swadlincote
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Swadlincote building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Nearby areas we cover from Swadlincote
We also cover towns near Swadlincote, including Burton upon Trent (6.8 km away), Coalville and Derby. If your building is in DE11 or a neighbouring district, the service and pricing are the same.
Common questions
Is Swadlincote within your coverage area?
It is. We cover Swadlincote in Derbyshire and neighbouring towns such as Burton upon Trent. There is no charge for the survey.
How quickly can you survey in Swadlincote?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.