FD60 fire doors in Kendal

Getting FD60 fire doors right in Kendal

For property owners, landlords and managing agents in Kendal, we offer FD60 fire doors with one team for the survey, the product and the installation.

Kendal has a broad mix of buildings, including light industrial buildings, family homes after loft conversions and small blocks of flats, and the same fire door principles apply to all of them.

FD60 openings in Kendal buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. For FD60 work in Kendal we generally fit certified doorsets, so frame and leaf share the same test evidence.

When does a building need FD60 rather than FD30?

FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.

We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.

On a typical job that means:

• Check of the fire strategy rating for each opening
• Certified FD60 doorset or leaf with matching evidence
• Intumescent and smoke seals as specified
• Frame fixing and structural gap sealing recorded with photos

What the rules say for Kendal

Fire doors in Kendal fall under English rules. New and replacement doors are covered by the Building Regulations 2010 and Approved Document B. In workplaces and the common parts of blocks, the Regulatory Reform (Fire Safety) Order 2005, as clarified by the Fire Safety Act 2021, puts the duty on the responsible person to keep fire doors suitable and maintained.

For residential buildings in Kendal above 11 metres, regulation 10 of the Fire Safety (England) Regulations 2022 adds checks: communal fire doors at least every three months and best-endeavours checks of flat entrance doors at least every twelve months. Higher-risk buildings of at least 18 metres or seven storeys also come under the Building Safety Act 2022, where works may need approval from the Building Safety Regulator.

Which buildings in Kendal need FD60 fire doors?

The need for FD60 fire doors usually arises in refuse stores or stair cores in taller blocks, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Kendal to keep escape routes protected throughout.

The steps on a Kendal installation

1. Confirm the 60-minute requirement against the fire strategy
2. Survey structure, opening size and wall type
3. Order the certified doorset with ironmongery to its evidence
4. Install the frame, fix and seal it to the structure
5. Hang, adjust and test the leaf, closer and latching
6. Record evidence and make good

Guide prices in Kendal

Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one Kendal building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.

Around Kendal

Neighbouring towns such as Morecambe, Lancaster, Barrow-in-Furness and Fleetwood are covered too, so clients with several buildings can use one installer and one evidence format.

Common questions