FD60 fire doors in County Tyrone, done to the evidence
We provide FD60 fire doors across County Tyrone, covering 12 postcode districts from BT68 to BT82.
FD60 openings in County Tyrone buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a County Tyrone building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
Managing agents, landlords, schools, care providers, businesses and homeowners in County Tyrone can all use one team for survey, supply, installation and evidence. We plan work around occupants and hand over a record for every door.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
What the rules say for County Tyrone
County Tyrone is in Northern Ireland, where fire doors are covered by the Building Regulations (Northern Ireland) 2012 and Technical Booklet E on fire safety. Duties in non-domestic premises come from the Fire and Rescue Services (Northern Ireland) Order 2006 and the Fire Safety Regulations (Northern Ireland) 2010.
The English regulation 10 checking regime does not apply here, so the fire risk assessment sets how often doors in County Tyrone are checked. We hand over evidence that supports it.
From enquiry to handover in County Tyrone
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in County Tyrone
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
FD60 fire doors questions
Do you provide FD60 fire doors across County Tyrone?
Yes. We cover all of County Tyrone. Surveys and written quotes are free.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.