FD60 fire doors for County Londonderry buildings
We provide FD60 fire doors across County Londonderry, covering 9 postcode districts from BT45 to BT56.
FD60 openings in County Londonderry buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a County Londonderry building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
County Londonderry has a mix of buildings, from purpose-built blocks to converted houses and commercial premises. We tailor the programme to the building, not the other way round.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
The regulations behind fire doors in County Londonderry
Fire door work in County Londonderry follows Northern Ireland's rules: the Building Regulations (Northern Ireland) 2012, with Technical Booklet E as the fire safety guidance, and the Fire Safety Regulations (Northern Ireland) 2010 for premises covered by the 2006 Order.
Council building control handles building work approvals in Northern Ireland, and your fire risk assessment sets the inspection frequency for doors in County Londonderry.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in County Londonderry
Guide pricing for FD60 fire doors: £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. Volume work across several doors in one County Londonderry building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
FD60 fire doors questions
Do you provide FD60 fire doors across County Londonderry?
Yes. We cover all of County Londonderry, including Derry and Coleraine. Surveys and written quotes are free.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.