Getting FD60 fire doors right in Bangor
For property owners, landlords and managing agents in Bangor, we offer FD60 fire doors with one team for the survey, the product and the installation.
Around Bangor, care homes, HMOs and low-rise blocks of flats all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For FD60 work in Bangor we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Bangor buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
When does a building need FD60 rather than FD30?
FD60 doors appear where the fire strategy asks a wall to resist fire for an hour: stair cores and lobbies in taller buildings, plant and boiler rooms, some service risers, refuse stores and compartment walls between different uses. The rating follows the wall. Fitting an FD30 door in a 60-minute wall leaves a weak point, and fitting FD60 everywhere wastes money and makes doors harder to open.
We work from your fire strategy, the building's drawings or the fire risk assessment. Where these disagree with what is on site, we flag it before ordering.
Each installation includes:
- Intumescent and smoke seals as specified
- Certified FD60 doorset or leaf with matching evidence
- Check of the fire strategy rating for each opening
- Load-rated hinges and correctly powered closer
What the rules say for Bangor
Fire door work in Bangor follows Northern Ireland's rules: the Building Regulations (Northern Ireland) 2012, with Technical Booklet E as the fire safety guidance, and the Fire Safety Regulations (Northern Ireland) 2010 for premises covered by the 2006 Order.
Council building control handles building work approvals in Northern Ireland, and your fire risk assessment sets the inspection frequency for doors in Bangor.
Where FD60 fire doors fit in Bangor
You are most likely to need FD60 fire doors if you look after stair cores in taller blocks, mixed-use commercial buildings or plant and boiler rooms. Whatever the building in Bangor, we survey each opening and tell you which doors need work and which do not.
Our process in Bangor
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Bangor
As a guide, budget £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. The figure for your Bangor building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.
Covering Bangor and nearby
Beyond Bangor itself we also cover nearby towns such as Newtownards (7.8 km), Carrickfergus and Newtownabbey. The service, pricing and evidence are the same wherever you are.
Questions
Do you work in Bangor?
Yes, we take on FD60 fire doors in Bangor and the surrounding area, including Newtownards and Carrickfergus. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Bangor?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.