FD60 fire doors in Carrickfergus, done to the evidence
From the BT38 postcode district outwards, we take on FD60 fire doors across Carrickfergus for homes, blocks and workplaces.
Around Carrickfergus, family homes after loft conversions, small offices and light industrial buildings all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
For FD60 work in Carrickfergus we generally fit certified doorsets, so frame and leaf share the same test evidence. FD60 openings in Carrickfergus buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What you get:
- Certified FD60 doorset or leaf with matching evidence
- Frame fixing and structural gap sealing recorded with photos
- Intumescent and smoke seals as specified
- Load-rated hinges and correctly powered closer
Which fire door rules apply in Carrickfergus?
Carrickfergus is in Northern Ireland, where fire doors are covered by the Building Regulations (Northern Ireland) 2012 and Technical Booklet E on fire safety. Duties in non-domestic premises come from the Fire and Rescue Services (Northern Ireland) Order 2006 and the Fire Safety Regulations (Northern Ireland) 2010.
The English regulation 10 checking regime does not apply here, so the fire risk assessment sets how often doors in Carrickfergus are checked. We hand over evidence that supports it.
Buildings and duty holders in Carrickfergus
The need for FD60 fire doors usually arises in mixed-use commercial buildings or stair cores in taller blocks, and sometimes plant and boiler rooms. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Carrickfergus to keep escape routes protected throughout.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in Carrickfergus
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Nearby areas we cover from Carrickfergus
We also cover towns near Carrickfergus, including Newtownabbey (9.1 km away), Bangor and Belfast. If your building is in BT38 or a neighbouring district, the service and pricing are the same.
Questions
Is Carrickfergus within your coverage area?
It is. We cover Carrickfergus in County Antrim and neighbouring towns such as Newtownabbey. There is no charge for the survey.
Can you work from an existing inspection report for my Carrickfergus building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Are FD60 doors harder to open?
They are heavier, so the closer has to be chosen and adjusted with care. A well-set closer will still close and latch the door while keeping the opening force reasonable for the people who use it.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.