What FD60 fire doors in County Armagh should include
Our FD60 fire doors service covers all of County Armagh, across postcode districts including BT60, BT67 and BT64.
Before ordering FD60 doors for a County Armagh building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in County Armagh we generally fit certified doorsets, so frame and leaf share the same test evidence.
Wherever your building is in County Armagh, the fire safety duties come from national rules, and our installation standard is the same.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
Which fire door rules apply in County Armagh?
Fire door work in County Armagh follows Northern Ireland's rules: the Building Regulations (Northern Ireland) 2012, with Technical Booklet E as the fire safety guidance, and the Fire Safety Regulations (Northern Ireland) 2010 for premises covered by the 2006 Order.
Council building control handles building work approvals in Northern Ireland, and your fire risk assessment sets the inspection frequency for doors in County Armagh.
What happens after you enquire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Guide prices in County Armagh
If you need a budget figure first, the guide for FD60 fire doors is £850–£1,800 per FD60 doorset supplied and fitted, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Questions
Do you provide FD60 fire doors across County Armagh?
Yes. We cover all of County Armagh, including Craigavon and Portadown. Surveys and written quotes are free.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.