What FD60 fire doors in Buckinghamshire should include
Our FD60 fire doors service runs throughout Buckinghamshire. Main towns include Milton Keynes, High Wycombe and Aylesbury, and we cover the smaller places in between.
Before ordering FD60 doors for a Buckinghamshire building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer. For FD60 work in Buckinghamshire we generally fit certified doorsets, so frame and leaf share the same test evidence.
Wherever your building is in Buckinghamshire, the fire safety duties come from national rules, and our installation standard is the same.
What do you hand over at the end?
For every FD60 opening we record the product and certificate reference, the gap measurements, the hinge and closer specification, how the frame was fixed and what was used to seal the frame-to-structure gap, with photographs before the architraves go on. That record is what your fire risk assessor or building control officer will ask for.
What the rules say for Buckinghamshire
The rules that apply to fire doors in Buckinghamshire are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Buckinghamshire block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Our process in Buckinghamshire
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Prices for FD60 fire doors in Buckinghamshire
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Buckinghamshire as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Questions
Do you provide FD60 fire doors across Buckinghamshire?
Yes. We cover all of Buckinghamshire, including Milton Keynes and High Wycombe. Surveys and written quotes are free.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.
Is FD60 just a thicker FD30?
No. FD60 doors are built and tested as a different product, usually with a thicker core, different seals and different ironmongery. Only the tested combination carries the 60-minute rating.