FD60 fire doors in Aberdeen: what's involved
Our FD60 fire doors service in Aberdeen is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.
Buildings in and around Aberdeen range from industrial units to converted period houses and GP surgeries. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
FD60 openings in Aberdeen buildings tend to be stair cores, plant rooms and bin stores in larger blocks and commercial premises. Before ordering FD60 doors for a Aberdeen building, we check the rating each opening actually needs, because over-specifying makes doors heavier and dearer.
Why FD60 installation is less forgiving
A 54mm leaf can weigh considerably more than a 44mm one. That weight drives everything else: more robust frames and fixings, hinges rated for the load, and a closer with enough power to close and latch the door without making it too heavy to open. Glazing, if any, must use a 60-minute glass and glazing system from the same test evidence.
Because of this, most FD60 openings are best done as a certified doorset, so the frame and leaf come with matching evidence.
What you get:
- Intumescent and smoke seals as specified
- Frame fixing and structural gap sealing recorded with photos
- Load-rated hinges and correctly powered closer
- 60-minute glazing systems where vision panels are needed
What the rules say for Aberdeen
Scottish rules apply to fire doors in Aberdeen. The Technical Handbooks under the Building (Scotland) Regulations 2004 set the standard for new and altered doors, and the local authority issues building warrants where they are needed. Workplaces and other non-domestic premises are covered by the Fire (Scotland) Act 2005.
Residential common parts in Aberdeen are treated differently from England, so we check the fire risk assessment and any landlord or factor requirements before specifying work.
Which buildings in Aberdeen need FD60 fire doors?
Typical settings for FD60 fire doors include stair cores in taller blocks, refuse stores and plant and boiler rooms. In Aberdeen, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
The steps on a Aberdeen installation
- Confirm the 60-minute requirement against the fire strategy
- Survey structure, opening size and wall type
- Order the certified doorset with ironmongery to its evidence
- Install the frame, fix and seal it to the structure
- Hang, adjust and test the leaf, closer and latching
- Record evidence and make good
Budgeting for FD60 fire doors in Aberdeen
Budget around £850–£1,800 per FD60 doorset supplied and fitted, ex VAT for FD60 fire doors. Our guide prices are the same in Aberdeen as elsewhere; what changes the cost is the doors themselves. Use our guide-price tool for a quick estimate.
Covering Aberdeen and nearby
As well as Aberdeen, we cover neighbouring towns including Arbroath, Dundee and Elgin. The survey and quote are free.
Questions
Do you work in Aberdeen?
Yes, we take on FD60 fire doors in Aberdeen and the surrounding area, including Arbroath and Dundee. Send your postcode and a few details and we'll come back with survey dates.
Can you work from an existing inspection report for my Aberdeen building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Can I upgrade an FD30 door to FD60?
Not by adding parts. An FD30 leaf cannot be turned into an FD60 door with extra strips or paint. If an opening needs 60 minutes, the leaf, and usually the frame, need to be replaced with a certified FD60 product.
Do FD60 doors need smoke seals?
If the fire strategy asks for smoke control, yes: the door will be specified as FD60S or E60Sa with smoke seals. Many plant room doors are FD60 without a smoke requirement.