Fire door supply and fitting in England, Wales, Scotland and Northern Ireland sales@firedoor-installation.comGuide prices
Fire Door Installation

FD30 fire doors in Penarth

The everyday 30-minute fire door, supplied as a leaf or full doorset and fitted to its evidence. Covering Penarth and CF64, with a free survey and fixed written quote.

Quote in Penarth

Free survey and a fixed written quote.

Prefer to talk? Call 0800 088 6248.

FD30 fire doors for Penarth buildings

Our FD30 fire doors service covers Penarth and the wider South Glamorgan area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.

Around Penarth, light industrial buildings, schools and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

In Penarth, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Penarth is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

On a typical job that means:

  • Fire-tested hinges, latch or lock and intumescent pads
  • Survey of the opening, frame and existing ironmongery
  • Frame-to-wall gap sealed with an evidenced material
  • Intumescent strips and smoke seals to the certification

What the rules say for Penarth

Because Penarth is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Penarth comes from your fire risk assessment.

Which buildings in Penarth need FD30 fire doors?

Landlords, managing agents, facilities teams and homeowners in Penarth can all commission FD30 fire doors from us. The usual settings are blocks of flats and care homes, though single doors for HMOs are just as welcome.

What happens after you enquire

  1. Measure the opening, check the frame and confirm the rating needed
  2. Order a certified leaf or doorset to size, with matching components
  3. Remove the old door and assess the frame or structural opening
  4. Fix the frame and hang the leaf to the certified gap tolerances
  5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
  6. Seal the frame-to-wall gap, make good and record the evidence

What does FD30 fire doors cost in Penarth?

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Penarth and nearby

Nearby towns we cover include Cardiff, Barry and Caerphilly. Distance from Penarth does not change our guide prices, and the survey and quote are free.

Questions from Penarth

Do you work in Penarth?

Yes, we take on FD30 fire doors in Penarth and the surrounding area, including Cardiff and Barry. Send your postcode and a few details and we'll come back with survey dates.

What happens on a survey in Penarth?

We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.

How long does it take to fit an FD30 door?

A leaf into a sound frame is often a few hours. A full doorset including frame removal, fixing, sealing and making good is usually half a day to a day per opening, depending on access and the wall construction.

Can a new FD30 door go into my old frame?

Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.

More FD30 fire doors in South Glamorgan

Book a free survey in Penarth

Tell us about the doors and we will come back with survey dates and a fixed written quote.

CallGet a quote