FD30 fire doors in Caerphilly

FD30 fire doors for Caerphilly buildings

Our FD30 fire doors service in Caerphilly is simple: a survey, a fixed quote, certified products and an installation finished to the manufacturer's evidence.

Buildings in and around Caerphilly range from small offices to family homes after loft conversions and light industrial buildings. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.

Each FD30 leaf we supply for Caerphilly is sized for the opening, rather than trimmed beyond what its certification allows. In Caerphilly, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Intumescent strips and smoke seals to the certification
• Overhead closer set to close and latch
• Fire-tested hinges, latch or lock and intumescent pads
• Photo record, product data and certificate references at handover

What the rules say for Caerphilly

Because Caerphilly is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Caerphilly comes from your fire risk assessment.

Buildings and duty holders in Caerphilly

The need for FD30 fire doors usually arises in shops or care homes, and sometimes HMOs. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Caerphilly to keep escape routes protected throughout.

From enquiry to handover in Caerphilly

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Caerphilly

If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.

Covering Caerphilly and nearby

We also cover towns near Caerphilly, including Risca (8.9 km away), Pontypridd and Cardiff. If your building is in CF83 or a neighbouring district, the service and pricing are the same.

Questions from Caerphilly