FD30 fire doors in Pontypool

FD30 fire doors for Pontypool buildings

If you need FD30 fire doors in Pontypool, we can survey, supply and install, then leave you the evidence your fire risk assessor will ask for.

Around Pontypool, schools, houses with integral garages and care homes all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.

For a mixed portfolio in Pontypool, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side. Each FD30 leaf we supply for Pontypool is sized for the opening, rather than trimmed beyond what its certification allows.

Leaf only or a full doorset?

If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.

We tell you which route each opening needs on the survey, door by door, and why.

As standard, the work covers:

• Overhead closer set to close and latch
• Fire-tested hinges, latch or lock and intumescent pads
• Frame-to-wall gap sealed with an evidenced material
• Photo record, product data and certificate references at handover

Which fire door rules apply in Pontypool?

Because Pontypool is in Wales, we work to the Building Regulations as they apply in Wales and to the Welsh version of Approved Document B. The responsible person duties under the Fire Safety Order 2005 still apply to workplaces and common parts.

England's fire door checking rules for tall residential buildings do not apply in Wales, so the checking frequency for doors in Pontypool comes from your fire risk assessment.

Where FD30 fire doors fit in Pontypool

Typical settings for FD30 fire doors include HMOs, offices and shops. In Pontypool, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.

The steps on a Pontypool installation

1. Measure the opening, check the frame and confirm the rating needed
2. Order a certified leaf or doorset to size, with matching components
3. Remove the old door and assess the frame or structural opening
4. Fix the frame and hang the leaf to the certified gap tolerances
5. Fit seals, hinges, latch, closer and signage, then test close-and-latch
6. Seal the frame-to-wall gap, make good and record the evidence

Guide prices in Pontypool

As a guide, budget £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT for FD30 fire doors. The figure for your Pontypool building depends on the number of doors, the rating, the condition of the frames, finishes, hardware and access. We confirm a fixed price after the free survey.

Around Pontypool

Nearby towns we cover include Cwmbran, Risca and Newport (Gwent). Distance from Pontypool does not change our guide prices, and the survey and quote are free.

Questions