What FD30 fire doors in Portadown should include
Looking for FD30 fire doors in Portadown? We supply and fit certified fire doors and components across Portadown and the wider County Armagh area, working from a free survey and a fixed written quote.
Around Portadown, small blocks of flats, small offices and houses with integral garages all depend on fire doors that close, latch and seal. We survey each opening and tell you plainly which doors need work and which don't.
In Portadown, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. Each FD30 leaf we supply for Portadown is sized for the opening, rather than trimmed beyond what its certification allows.
Leaf only or a full doorset?
If the existing frame is sound, correctly sized, securely fixed and compatible with the new leaf's certification, a new FD30 leaf can be hung in it. Many frames do not pass that test: old softwood linings, frames that have been cut about for previous doors, or frames with no evidence of how they were fixed. In those cases a certified doorset (leaf, frame and ironmongery tested together) is the cleaner answer and usually the quicker one on site.
We tell you which route each opening needs on the survey, door by door, and why.
What you get:
- Overhead closer set to close and latch
- Photo record, product data and certificate references at handover
- Fire-tested hinges, latch or lock and intumescent pads
- Survey of the opening, frame and existing ironmongery
Which fire door rules apply in Portadown?
Fire door work in Portadown follows Northern Ireland's rules: the Building Regulations (Northern Ireland) 2012, with Technical Booklet E as the fire safety guidance, and the Fire Safety Regulations (Northern Ireland) 2010 for premises covered by the 2006 Order.
Council building control handles building work approvals in Northern Ireland, and your fire risk assessment sets the inspection frequency for doors in Portadown.
Where FD30 fire doors fit in Portadown
From blocks of flats to offices, the requirement for FD30 fire doors in Portadown comes from the fire strategy or risk assessment for the building. We work from that document, or help you interpret your inspection report, before quoting.
Our process in Portadown
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
What does FD30 fire doors cost in Portadown?
Guide pricing for FD30 fire doors: £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. Volume work across several doors in one Portadown building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Portadown
Neighbouring towns such as Craigavon, Newry, Lisburn and Belfast are covered too, so clients with several buildings can use one installer and one evidence format.
Questions
Do you work in Portadown?
Yes, we take on FD30 fire doors in Portadown and the surrounding area, including Craigavon and Newry. Send your postcode and a few details and we'll come back with survey dates.
What happens on a survey in Portadown?
We look at every door in scope: the leaf, frame, gaps, seals, hinges, closer, glazing and how the frame is fixed. You then get a written quote that prices each door separately.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
What is the difference between FD30 and FD30S?
FD30S has been tested for smoke control as well as fire. It adds a smoke seal, usually a brush or blade, and needs a tight threshold gap. Flat entrance doors and doors onto protected escape routes are commonly specified as FD30S.