What FD30 fire doors in Carrickfergus should include
Our FD30 fire doors service covers Carrickfergus and the wider County Antrim area. Every job starts with a survey of the openings, so the quote reflects your actual doors rather than a guess.
Buildings in and around Carrickfergus range from care homes to small blocks of flats and family homes after loft conversions. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
In Carrickfergus, FD30 doors are the usual choice for escape-route corridors, stairs and kitchen doors where the fire strategy asks for 30 minutes. For a mixed portfolio in Carrickfergus, we can survey every FD30 opening in one visit and price leaf-only and doorset options side by side.
Where are FD30 doors used?
FD30 is the rating most buildings rely on. You will find it on flat entrance doors, doors onto escape corridors and stairs in houses in multiple occupation, kitchen doors in HMOs, and most internal doors on escape routes in offices, schools, surgeries and shops. Where smoke control matters too, the door is specified as FD30S (E30Sa), which adds a smoke seal and a tighter threshold.
The rating your building needs comes from its fire strategy or fire risk assessment, not from the door supplier. If you are unsure whether a door should be FD30 or FD60, we check the drawings, the risk assessment and what is installed now before we price anything. Our FD30 vs FD60 guide explains the difference.
What you get:
- Survey of the opening, frame and existing ironmongery
- Certified FD30 or FD30S leaf, or full doorset
- Intumescent strips and smoke seals to the certification
- Overhead closer set to close and latch
The regulations behind fire doors in Carrickfergus
Carrickfergus is in Northern Ireland, where fire doors are covered by the Building Regulations (Northern Ireland) 2012 and Technical Booklet E on fire safety. Duties in non-domestic premises come from the Fire and Rescue Services (Northern Ireland) Order 2006 and the Fire Safety Regulations (Northern Ireland) 2010.
The English regulation 10 checking regime does not apply here, so the fire risk assessment sets how often doors in Carrickfergus are checked. We hand over evidence that supports it.
Buildings and duty holders in Carrickfergus
Typical settings for FD30 fire doors include shops, offices and HMOs. In Carrickfergus, as anywhere, the duty holder varies: a responsible person for a workplace, a landlord or managing agent for a block or HMO, or a homeowner after building work. We adjust access, timing and paperwork to suit whoever commissions the work.
From enquiry to handover in Carrickfergus
- Measure the opening, check the frame and confirm the rating needed
- Order a certified leaf or doorset to size, with matching components
- Remove the old door and assess the frame or structural opening
- Fix the frame and hang the leaf to the certified gap tolerances
- Fit seals, hinges, latch, closer and signage, then test close-and-latch
- Seal the frame-to-wall gap, make good and record the evidence
Prices for FD30 fire doors in Carrickfergus
If you need a budget figure first, the guide for FD30 fire doors is £300–£600 for a leaf into a sound existing frame; £650–£1,300 for a doorset, ex VAT. We firm that up after a survey, pricing each door separately so you can see where the money goes.
Around Carrickfergus
We also cover towns near Carrickfergus, including Newtownabbey (9.1 km away), Bangor and Belfast. If your building is in BT38 or a neighbouring district, the service and pricing are the same.
Questions from Carrickfergus
Is Carrickfergus within your coverage area?
It is. We cover Carrickfergus in County Antrim and neighbouring towns such as Newtownabbey. There is no charge for the survey.
Can you work from an existing inspection report for my Carrickfergus building?
Yes. Send it over and we can often price straight from it, then confirm on site. We report back against the same door references so you can close actions off.
Do FD30 doors need a closer?
Most do. Doors on escape routes, flat entrance doors and doors in the common parts of buildings need a self-closing device that shuts and latches the door. Some doors inside houses and locked riser doors are exceptions, depending on the fire strategy.
Can a new FD30 door go into my old frame?
Sometimes. The frame has to be sound, square, securely fixed and compatible with the new leaf's certification. Many older frames are not, especially softwood linings or frames altered for previous doors. We check each frame on the survey and recommend a doorset only where the frame cannot be relied on.