What double fire doors in Aston should include
We provide double fire doors in Aston (B6 and the surrounding postcodes), from the first survey through to a documented handover.
Buildings in and around Aston range from houses with integral garages to small blocks of flats and schools. Whatever the building, the standard is the same: certified products, correct gaps, seals and closers, and a frame sealed to the wall.
Double doors on wards, school corridors and lobbies in Aston take heavy use, so closing sequence and meeting-edge seals get extra attention. Leaf-and-a-half doors are a practical option for Aston care homes and schools that need occasional wide access.
Hold-opens and escape
Pairs on corridors are often held open in daily use, with hold-open devices releasing both leaves when the alarm sounds. Where a pair is on an escape route used by the public, the escape hardware and the direction of opening also need to suit the fire strategy.
As standard, the work covers:
- Meeting-stile intumescent and smoke seals
- Closers matched to each leaf
- Flush bolts and hold-opens within evidence
- Commissioning of closing sequence
Which fire door rules apply in Aston?
The rules that apply to fire doors in Aston are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Aston block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Buildings and duty holders in Aston
The need for double fire doors usually arises in schools or hospitals and clinics, and sometimes office cores. Each has its own pressures, such as residents at home or a building that must stay open, so we plan the sequence of work in Aston to keep escape routes protected throughout.
How a Aston job runs
- Survey opening width, use and traffic
- Select pair configuration and hardware set
- Order certified doorset with coordinator and bolts if needed
- Install frame and hang both leaves
- Set closing sequence, seals and latching
- Test hold-open release and record evidence
Guide prices in Aston
Guide pricing for double fire doors: £1,600–£3,400 per pair supplied and fitted, depending on glazing and hardware, ex VAT. Volume work across several doors in one Aston building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Aston and neighbouring towns
We also cover towns near Aston, including Birmingham (2.3 km away), Washwood Heath and Smethwick. If your building is in B6 or a neighbouring district, the service and pricing are the same.
Questions from Aston
Do you cover B6 and nearby postcodes?
Yes. We cover Aston including B6, and nearby towns such as Birmingham and Washwood Heath. The survey and written quote are free.
How quickly can you survey in Aston?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Why does the gap between the two leaves matter?
The meeting edges are where flame and smoke can pass most easily. The gap and the seals there must match the certification for the pair to perform as tested.
Can double fire doors be held open?
Yes, with hold-open devices that release on the fire alarm, or with free-swing closers. Wedges and hooks are not acceptable.