Double fire doors in Rayleigh: what's involved
From the SS6 postcode district outwards, we take on double fire doors across Rayleigh for homes, blocks and workplaces.
Fire doors in Rayleigh protect escape routes in houses with integral garages, light industrial buildings and schools alike. We adapt the programme to the building and its occupants, never the standard of the installation.
Every pair we fit in Rayleigh is commissioned so both leaves close in the right order and latch. Leaf-and-a-half doors are a practical option for Rayleigh care homes and schools that need occasional wide access.
Hold-opens and escape
Pairs on corridors are often held open in daily use, with hold-open devices releasing both leaves when the alarm sounds. Where a pair is on an escape route used by the public, the escape hardware and the direction of opening also need to suit the fire strategy.
What you get:
- Commissioning of closing sequence
- Closers matched to each leaf
- Door coordinators where meeting edges are rebated
- Equal pair or leaf-and-a-half doorsets
Which fire door rules apply in Rayleigh?
The rules that apply to fire doors in Rayleigh are England's. The responsible person under the Regulatory Reform (Fire Safety) Order 2005 must keep fire doors in non-domestic premises and the common parts of flats in working order; the Fire Safety Act 2021 confirmed that this includes flat entrance doors onto common parts.
Where a Rayleigh block is above 11 metres, regulation 10 of the 2022 regulations means communal doors are checked every three months and flat entrance doors annually on a best-endeavours basis. Replacement doors must also satisfy the Building Regulations, with Approved Document B as the guidance most building control bodies work from.
Which buildings in Rayleigh need double fire doors?
You are most likely to need double fire doors if you look after care homes, schools or communal corridors. Whatever the building in Rayleigh, we survey each opening and tell you which doors need work and which do not.
Our process in Rayleigh
- Survey opening width, use and traffic
- Select pair configuration and hardware set
- Order certified doorset with coordinator and bolts if needed
- Install frame and hang both leaves
- Set closing sequence, seals and latching
- Test hold-open release and record evidence
Budgeting for double fire doors in Rayleigh
Guide pricing for double fire doors: £1,600–£3,400 per pair supplied and fitted, depending on glazing and hardware, ex VAT. Volume work across several doors in one Rayleigh building usually brings the per-door cost down. Your written quote is fixed once we have surveyed.
Around Rayleigh
We also cover towns near Rayleigh, including South Benfleet (4.8 km away), Wickford and Pitsea. If your building is in SS6 or a neighbouring district, the service and pricing are the same.
Questions from Rayleigh
Do you work in Rayleigh?
Yes, we take on double fire doors in Rayleigh and the surrounding area, including South Benfleet and Wickford. Send your postcode and a few details and we'll come back with survey dates.
How quickly can you survey in Rayleigh?
It depends on the number of doors and access, but we offer survey dates as soon as we reply to your enquiry. If an inspection has found urgent safety issues, tell us and we'll prioritise.
Why does the gap between the two leaves matter?
The meeting edges are where flame and smoke can pass most easily. The gap and the seals there must match the certification for the pair to perform as tested.
Can double fire doors be held open?
Yes, with hold-open devices that release on the fire alarm, or with free-swing closers. Wedges and hooks are not acceptable.